Our site is not fully compatible with Internet Explorer. We strongly suggest using Google Chrome, Firefox, Safari, or Edge.

FT Injector 320 lb/h Fuel Injectors | New Release

August 04, 2021

Earlier this year FuelTech released its own line of fuel injectors—dubbed FT Injector—and initially offered them in just 720 lb/h or 520 lb/h ratings, which were tested at 30-130 psi. Today, the motorsport technology company is proud to release a third option to the formidable line-up and it is rated at 320 lb/h at 90 psi.

The FT Injector 320 lb/h fuel injector is the perfect replacement for the older style 160, 210, and 220 lb/h injectors, offering higher output and superior reliability. All FT Injectors are designed to operate as low as 30 psi and as high as 130 psi thanks to its design, which allows for a quick ramp up in flow and extremely high duty cycles. In fact, it isn’t unusual for the FT Injectors to handle over 90% duty cycle without losing control or getting hung open. Credit the superior magnetic coil and spring that controls the plunger for its high level of performance. Superior manufacturing and quality control also factor into the reliability and high-performance of the FT Injector line-up. Every injector component is built and checked to high standards before assembly begins. The process concludes with flow testing every injector before it is boxed up and shipped. Every FT Injector is designed to handle all types of fuel including gasoline, ethanol, methanol/alcohol, nitromethane, nitropropane, MTBE, and ETBE.

The FT Injector line-up are all low impedance style injectors, including the 320 lb/h fuel injectors, and require the use of the FuelTech 8A/2A Peak and Hold injector driver for vehicles utilizing a PowerFT engine management system. As a side note, these injectors are compatible with any aftermarket ECU. The FT Injector is offered with three output tip options—traditional O-ring, 45-degree tip, and AN fitting. The AN fitting tip is most often used in Roots/Twin-screw supercharger blower hats while the 45-degree tip allows various injector angles in the intake runners when space is limited.

From 5,000 whp record-breaking Pro Modifieds who need reliable fuel injectors, FuelTech is providing technologically advanced solutions and that is the reason why you’re seeing #FuelTechEverywhere

Also in FuelTech Blog

FuelTech’s EGT-4 for Enhanced Performance Monitoring

December 02, 2024

FuelTech’s EGT-4 (Exhaust Gas Temperature 4 Channel) module is designed to provide accurate and real-time data for up to four K-type thermocouple sensors via the FuelTech ECU’s CAN bus network.

SwitchPanels: Streamlined Control for High-Performance Builds

December 02, 2024

When it comes to high-performance vehicle builds, having efficient, intuitive control over your systems is crucial. FuelTech’s SwitchPanels are designed to provide a seamless interface for managing key vehicle functions, delivering reliability and ease of use to racers and enthusiasts alike

FuelTech the Brains for Stryten Energy’s Reluctance Jeep: A Hybrid Electric-Diesel

November 13, 2024

The Reluctance Jeep, a cutting-edge hybrid-electric concept vehicle, was unveiled by Stryten Energy at the 2024 SEMA Show. The hybrid system, built by Bruiser Conversions, is managed by FuelTech FT550 ECUs.