Our site is not fully compatible with Internet Explorer. We strongly suggest using Google Chrome, Firefox, Safari, or Edge.

Boost Activated Output

April 13, 2020

PRODUCTS YOU WILL NEED:

👉 STAGING / BRAKE CONTROL SOLID STATE RELAY

👉 SEALED RELAY HOLDER

👉 ANY POWERFT ECU

1. Open the FTMANAGER Software, got to MAP Options and enable Boost Activated Output 1, 2 or both

2. Go to the outputs section under sensors and calibration and configure your Boost Activated Output

3. Next, under other functions got to Boost Activated Output and set up how you want the feature to operate

4. Repeat on Boost Activated Output 2 if you have one and you're all set

Also in Tech Support Articles

How to Set-Up Transmission Dump Valves

October 22, 2024

Learn how to configure transmission dump valves with FuelTech ECUs for optimal engine tuning and performance. This guide covers internal and external dump valves, their benefits for turbo spooling and power management, and step-by-step setup in FTManager. Perfect for professional engine tuners and racers looking to gain a competitive edge on the track.

How to Set-Up Drive-By-Wire

October 18, 2024

Making drive-by-wire easy with this step-by-step guide that walks you through wiring and configuration in FuelTech's FTManager ECU software.

How to Wire and Set-Up Fuel Level Sensors

October 16, 2024

Learn how to set up a fuel level sensor on a FuelTech ECU with this step-by-step guide. From wiring the sensor to configuring it in the ECU's software, this article covers everything you need to monitor your vehicle's fuel levels accurately. Optimize your FuelTech system for real-time fuel management and improve performance with this easy-to-follow tutorial. Perfect for DIY enthusiasts and professionals alike.