Our site is not fully compatible with Internet Explorer. We strongly suggest using Google Chrome, Firefox, Safari, or Edge.

How to Set Up Alerts and Safeties

September 11, 2024

Setting up alerts and safeties allows you to monitor and safeguard your engine’s performance, especially in high-demand situations, and prevent engine damage. With FuelTech’s advanced systems, you can easily configure custom alerts and safety measures to prevent potential damage and ensure your engine runs smoothly. This step-by-step guide will help you configure key parameters, from temperature thresholds to pressure limits, providing peace of mind and protecting your investment. Whether you're new to tuning or an experienced professional, this guide will ensure your system is properly set up for optimal safety.

1. In the FTMANAGER software, go to the quick access panel on the left, scroll all the way down and click ALERT SETTINGS.

FTManager Alerts and Safeties FuelTech ECU

2. From here, check which alerts and safeties you want to enable.

FuelTech FTManager Alerts and Safeties Configuration

3. You have three options for an alert or safety, Engine Shut OFF, Warning Only, or Engine Safe Mode (Safe Mode limits the engine's RPM to a pre-programmed value).

FuelTech FTManager Alerts and Safeties Shut Off, Safe Mode, Warning

Always remember to set up important safeties to PROTECT YOUR ENGINE!

By following this step-by-step guide and utilizing FuelTech’s intuitive engine management system, you can have peace of mind knowing that your vehicle is equipped with the right safeguards to prevent potential damage. Properly configured alerts and safeties can not only extend the life of your engine but also optimize performance under various conditions. If you need additional support, FuelTech’s customer service is available to assist you in fine-tuning your setup for maximum protection.

Also in Tech Support Articles

How to Set Up Missing Tooth Trigger Wheel

September 11, 2024

How to Set-Up the Multifunction Button

August 29, 2024

By properly setting up the Multifunction Button on your FuelTech ECU, you’ll gain precise control over critical functions like line lock, staging, and boost + scramble, ensuring your vehicle is ready for the track. This configuration allows you to maximize performance, streamline your racing setup, and focus on what matters most, winning!

How to Set Up a 4L80E or 4L85E Transmission with FTManager

August 29, 2024

Setting up your 4L80E or 4L85E transmission with FTMANAGER delivers precise and reliable transmission control. In this guide, we’ll walk you through the necessary steps to configure your FuelTech ECU for seamless integration with these powerful GM transmissions.