Our site is not fully compatible with Internet Explorer. We strongly suggest using Google Chrome, Firefox, Safari, or Edge.

Setting Up The Pro Nitrous Feature

March 29, 2020

PRODUCTS YOU WILL NEED:

👉 Nitrous Solid State Relay

👉 PS-1500 Pressure Sensor

1. To begin, open the FTManager and open the Map Options in the task bar.

2. Under Drag Race features, select Pro-Nitrous

3. In the quick access panel, find Pro-Nitrous under drag race features.

4. Select how you want to enable the pro-nitrous feature and program the minimum and maximum RPMs allowed.

5. Click Pro-Nitrous Timers and Delays to set up how many stages you have and when they will activate.

6. Program the amount of Fuel Enrichment needed for each stage of nitrous.

7. Program the required amount of timing to be removed for each stage.

Also in Tech Support Articles

How to Set-Up Transmission Dump Valves

October 22, 2024

Learn how to configure transmission dump valves with FuelTech ECUs for optimal engine tuning and performance. This guide covers internal and external dump valves, their benefits for turbo spooling and power management, and step-by-step setup in FTManager. Perfect for professional engine tuners and racers looking to gain a competitive edge on the track.

How to Set-Up Drive-By-Wire

October 18, 2024

Making drive-by-wire easy with this step-by-step guide that walks you through wiring and configuration in FuelTech's FTManager ECU software.

How to Wire and Set-Up Fuel Level Sensors

October 16, 2024

Learn how to set up a fuel level sensor on a FuelTech ECU with this step-by-step guide. From wiring the sensor to configuring it in the ECU's software, this article covers everything you need to monitor your vehicle's fuel levels accurately. Optimize your FuelTech system for real-time fuel management and improve performance with this easy-to-follow tutorial. Perfect for DIY enthusiasts and professionals alike.