Our site is not fully compatible with Internet Explorer. We strongly suggest using Google Chrome, Firefox, Safari, or Edge.

Staging Control

March 30, 2020

PRODUCTS YOU WILL NEED:

👉 STAGING / BRAKE CONTROL SOLID STATE RELAY

👉 SEALED RELAY HOLDER

1. Wire the relay like below.

2. Open the FTMANAGER software and go to Map Options to enable Staging Control.

3. Next, find drag racing features in the quick access panel and click Staging Control / Transbrake, select your button activation mode and output activation mode.

4. Now go to your Inputs Screen and select the inputs you want to use for your Transbrake / 2-step button and your staging button.

5. Go to your Outputs Screen and assign your transbrake output to the output you wired your staging control rely to.

6. Once this is all configured, you can go back to the staging control feature and adjust your Staging Intensity and Frequency to make the car stage smoothly when the staging button is pressed.

* Each car and transmission is different. However using the values 20% and 15 HZ is a good starting point to work from.

Also in Tech Support Articles

How to Set Up Alerts and Safeties

September 11, 2024

How to Set Up Missing Tooth Trigger Wheel

September 11, 2024

How to Set-Up the Multifunction Button

August 29, 2024

By properly setting up the Multifunction Button on your FuelTech ECU, you’ll gain precise control over critical functions like line lock, staging, and boost + scramble, ensuring your vehicle is ready for the track. This configuration allows you to maximize performance, streamline your racing setup, and focus on what matters most, winning!